Application for 2D claddings and specifications in AutoCAD environment.
Command reference
Pick on button for command demo video
- Profile selection from internal database
- 1. Select cladding type, element type, profile, color, coating, thickness in dialogue window. It is possible to set slope against or along profile in degrees or percents
- 2. "Accept" button sets all selected parameters for current profile
- 3. All parameters of current profile will be used for drawing of vertical or horizontal objects until new current profile will be selected
- 4. Repeatedly opened dialogue window shows all parameters of current profile.
- Inserts vertical items
- 1. Select facade contour by left button (must be preformed as polygon or closed polyline)
- 2. Select alignment point by left button (for example corner of facade or window)
- 3. Instead of alignment point (pt 2) it is possible to press [Enter]. In this case alignment point will be set to left side of facade contour automatically
- Inserts horizontal items
- 1. Select facade contour by left button (must be preformed as polygon or closed polyline)
- 2. Select alignment point by left button (for example corner of facade or window)
- 3. Instead of alignment point (pt 2) it is possible to press [Enter]. In this case alignment point will be set to bottom side of facade contour automatically
- Converts view to plane
- 1. Select object to get all profiles with equal slopes
- 2. Pick point for plane
- Cuts openings
- 1. Select opening contour by left button (must be preformed as polygon or closed polyline)
- 2. Objects full width intersecting with opening contour will be divided automatically
- Divides items by dividing lines or openings
- 1. Select opening contour or dividing line by left button
- 2. Select all objects you want to divide and press [Enter]
- 3. Objects intersecting with opening contour or dividing line will be divided automatically
- 4. This command designed for dividing of long items or dividing objects partially intersecting with opening contour or dividing line
- Divides items by dividing lines or openings with gap
- 1. Select opening contour or dividing line by left button
- 2. Select all objects you want to divide and press [Enter]
- 3. Type gap value and press [Enter]
- Converts axis lines into dividing lines
- 1. Select facade contour by left button to set dividing lines
- 2. Select axial lines for converting into dividing lines and press [Enter]
- Adds supports
- 1. Select axis lines (must be created as polylines on layer "FS-axis")
- 2. Type support width value and press [Enter]
- Support 1: B/2+B/2
- 1. Select axis and press [Enter]
- 2. Select objects to divide by B/2+B/2 mode and press [Enter]
- Support 2: continuous
- 1. Select objects to append and press [Enter]
- Support 3: B/2+0.1L
- 1. Select axis
- 2. Select nearest axis to the right side to calculate distance
- 3. Select objects to divide by B/2+0.1L mode and press [Enter]
- Support 4: 0.1L+B/2
- 1. Select axis
- 2. Select nearest axis to the left side to calculate distance
- 3. Select objects to divide by 0.1L+B/2 mode and press [Enter]
- Support 5: 0.1L+0.1L
- 1. Select axis
- 2. Select nearest axis to the left side to calculate distance
- 3. Select nearest axis to the right side to calculate distance
- 4. Select objects to divide by 0.1L+0.1L mode and press [Enter]
- Support 0.1L+0.2L
- 1. Select axis
- 2. Select nearest axis to the left side to calculate distance
- 3. Select nearest axis to the right side to calculate distance
- 4. Select objects to divide by 0.1L+0.2L mode and press [Enter]
- Support 0.2L+0.1L
- 1. Select axis
- 2. Select nearest axis to the left side to calculate distance
- 3. Select nearest axis to the right side to calculate distance
- 4. Select objects to divide by 0.2L+0.1L mode and press [Enter]
- Clear side overlap
- 1. Select objects to clear side overlap and press [Enter]
- Side overlap 50%
- 1. Select objects to set side overlap 50% and press [Enter]
- Side overlap 2x
- 1. Select objects to set side overlap 2x and press [Enter]
- Side overlap 3x
- 1. Select objects to set side overlap 3x and press [Enter]
- Sets nonstandard RAL color
- 1. Select nonstandard RAL color in color table
- 2. Select destination objects to set new color and press [Enter]
- Sets Zn coating
- 1. Select destination objects to set Zn coating and press [Enter]
- Sets other thickness
- 1. Select objects to set new thickness and press [Enter]
- 2. Type new thickness value and press [Enter]
- Matches selected item properties
- 1. Select object by left button to set source properties
- 2. Select destination objects to match properties and press [Enter]
- 3. Command matches profile, thickness, length, color, coating and slopes.
- Changes length from the start of item
- 1. Start point is set to bottom side of vertical object and right side of horizontal object
- 2. Select objects to change length and press [Enter]
- 3. Type lengthening value or pick two points on screen and press [Enter]
- 4. If shortening is required, type negative value (keyboard option only)
- Changes length from the end of item
- 1. End point is set to upper side of vertical object and left side of horizontal object
- 2. Select objects to change length and press [Enter]
- 3. Type lengthening value or pick two points on screen and press [Enter]
- 4. If shortening is required, type negative value (keyboard option only)
- Performs numbering of all items in the drawing
- 1. Performs automatical numbering of all objects in the drawing
- 2. Attention: sorting and numbering requires time dependent on complexity of drawing and quantity of different objects and properties.
- Shows information for selected item
- 1. Select object by left button to get information
- 2. If properties window moved, selected item will be highlighted
- Shows and hides number labels
- 1. Dependent on drawing status shows and hides number labels
- Shows and hides all labels
- 1. Dependent on drawing status shows and hides all labels
- Shows and hides length labels
- 1. Dependent on drawing status shows and hides length labels
- Shows and hides color labels
- 1. Dependent on drawing status shows and hides color labels
- Shows and hides thickness
- 1. Dependent on drawing status shows and hides thickness labels
- Shows and hides slope against profile
- 1. Dependent on drawing status shows and hides slope against profile labels
- Shows and hides slope along profile
- 1. Dependent on drawing status shows and hides slope along profile labels
- Shows and hides side overlap
- 1. Dependent on drawing status shows and hides side overlap labels
- Shows and hides construction line
- 1. Dependent on drawing status shows and hides construction line
- Add grouping line automatically
- 1. Select object to get all similar profiles
- Add grouping line manually
- 1. Select object to get all similar profiles
- 2. Pick two points on screen for grouping line
- Deletes all objects and tables
- 1. Deletes all objects and tables automatically
- Sets drawing data for Insert border command
- 1. Opens text file for drawing data editing
- 2. Write required data and save file
- 3. Saved data will be inserted into drawing border
- Inserts predefined A4 border
- 1. Pick area by two points on screen for drawing border
- 2. Border scale will be calculated automatically by selected area
- 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
- Inserts predefined A3 border
- 1. Pick area by two points on screen for drawing border
- 2. Border scale will be calculated automatically by selected area
- 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
- Inserts predefined A2 border
- 1. Pick area by two points on screen for drawing border
- 2. Border scale will be calculated automatically by selected area
- 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
- Inserts predefined A1 border
- 1. Pick area by two points on screen for drawing border
- 2. Border scale will be calculated automatically by selected area
- 3. Instead of selecting area it is possible to press [Enter]. In this case drawing border will be inserted in scale M1:100. Pick border insertion point on screen
- Inserts specification table
- 1. Pick table insertion point on screen
- 2. Write description for specification
- 3. Specification table will be created for all objects in drawing
- 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
- Inserts specification table by selection
- 1. Select objects for specification and press [Enter]
- 2. Pick table insertion point on screen
- 3. Write description for specification
- 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
- Inserts specification table by color
- 1. Select object for specification by color and press [Enter]
- 2. Pick table insertion point on screen
- 3. Write description for specification
- 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
- Inserts specification table by thickness
- 1. Select object for specification by thickness and press [Enter]
- 2. Pick table insertion point on screen
- 3. Write description for specification
- 4. Tip: insert A4 format drawing border in scale M1:100 before calling of specification command
- Specification table exported to tab-delimited format file
- 1. Opens specifications in tab-delimited format file for importing into speadsheet
- Inserts legend of profiles
- 1. Pick A4 border insertion point on screen
- 2. Command inserts legend for all used profiles in drawing
- Inserts cladding label
- 1. Select object for label
- 2. Pick point on screen for text label
- 3. Text style and size depends on current dimension style settings
- Registration order-form
- Attention: Windows Vista requires AutoCAD loaded in administration mode (right click on icon and "Run as administrator")
- 1. Fill-in license request form. All fields required
- 2. Send us new created registration file by email
- About application
- 1. Opens links to online help in browser
- Select beam
- Select joint
- Vertical beam
- Vertical beam
- Vertical beam
- Vertical beam
- Horizontal beam
- Horizontal beam
- Horizontal beam
- Horizontal beam
- Freehand beam
- Vertical joint
- Horizontal joint
- Joint by object
- Freehand joint
- Table of profiles
- Table of beams
- Table of beams by selection
- Table of beams by thickness
- Table of joints
- Table of joints by selection
- Table of joints by color
- Project data
- Panel overlap
- Move labels up
- Move labels down
- Total specification
- Edit specification line
- Table of profiles by selection
- Table of profiles by color
- Table of profiles by thickness
- Vertical profile
- Horizontal profile
- Insert border
All product names, registered trademarks, trade names or company names mentioned at in-axis.com or in-axis.lt are used for identification only and are the property of their respective owners.
Home